Jump to content
SolusVM Community


  • Content count

  • Joined

  • Last visited

  • Days Won


NickLaoZ last won the day on December 12 2018

NickLaoZ had the most liked content!

1 Follower

About NickLaoZ

  • Rank

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hey, Try this on the master php /usr/local/solusvm/scripts/clearauthlog.php --system --clear=all https://docs.solusvm.com/display/DOCS/Clear+the+Admin+Blacklist
  2. Hey, Try to reset cache on the slave: echo 3 > /proc/sys/vm/drop_caches swapoff -a && swapon -a
  3. Hi mathx Yeah, this is known behavior with SolusVM v1. Hope it will be fixed in next product
  4. NickLaoZ

    Windows template does not run

    In addition to previous post, the following info can be useful: https://support.solusvm.com/hc/en-us/articles/360020814031
  5. NickLaoZ

    No free leases error with SolusVM KVM slaves

    hi, try to add range parameter as it described in dhcp doc - https://www.isc.org/wp-content/uploads/2017/08/dhcp41conf.html subnet netmask { subnet-specific parameters... range; }
  6. Hi, Recommendations are the same as for other software running and kernel updates: use maintenance timeframe upgrade the kernel check the functionality like provisioning of virtuals servers and so on be ready to downgrade the kernel to the previous version ) As far as I know, there are no crucial issues after kernel update but you never know )
  7. NickLaoZ

    Windows template does not run

    Hi, Have you tried to install custom libguestfs tools on the CentOS 7 node - https://docs.solusvm.com/display/DOCS/Libguestfs ?
  8. NickLaoZ

    SolusVM WHMCS module not working

    Hey, Do you have any service plans created in SolusVM? Also, make sure that you added the lines from the article https://docs.solusvm.com/display/DOCS/SSL+Configuration to Access Hash field on the server settings page. And I suggest follow this document carefully - https://docs.solusvm.com/display/DOCS/WHMCS
  9. NickLaoZ

    VM not listening to public IP

    Good to know that this is solved )
  10. NickLaoZ

    VM not listening to public IP

    hi, there is a probability that you have configured bridge only for Internal network and did not configure bridge for public IP range you have. Here is an example of the bridged network on the working KVM slave: # brctl show bridge name bridge id STP enabled interfaces br0 8000.001c4267bb94 no eth0 kvm109.0 virbr0 8000.5254001e6701 yes virbr0-nic You need to setup a bridge interface for public IPs as it is described in the article https://documentation.solusvm.com/display/DOCS/KVM+Bridge+Setup It is in addition to the bridge for internal IPs You can paste here the output for the commands: brctl show ls -l /etc/sysconfig/network-scripts/ifcfg-*
  11. NickLaoZ

    Private Network best practice

    Hey, Could you clarify the scenario in more details? In general, you can try set up a several IP pools using IPs reserved for private networks (https://en.wikipedia.org/wiki/Private_network), e.g. -, - and so on. And configure routing to make them communicate. Mostly, SolusVM allows automating assigning IP address from private network IP addresses pool. For planning the entire network architecture it is better to consult with network engineer.
  12. I had an issue recently on newly deployed SolusVM installation and strugling with this for a several hours. The solution was so easy so I decided to post it here, maybe it will save to for other SolusVM users who will face it.I tried to configure noVNC feature on SolusVM v1.20.05 with HTML 5 console. I walked through the documentation https://docs.solusvm.com/display/DOCS/noVNC+Configuration and enabled the feature in configuration settings, installed all the necessary dependencies and SSL certificate. After all these steps I tried to connect to the running KVM VPS and connection windows displayed the error 'Server disconnected (code:1006)'. Long story short, I found that I did not create /usr/local/solusvm/data/config.ini with the following content: [NOVNC] use_remote_hostname = true socket_dest_public = false There is no such file as a default, only config.ini.sample template file, maybe that was the reason why I missed it. Once I created it and added the lines above, noVNC magic started to work
  13. Also, you can connect to the container's command line with "vzctl enter CTID" command and check its network configuration and logs inside of the container directly. CTID should be replaced with actual ID of the container.
  14. NickLaoZ

    debian and ubuntu kvm templates from TDN

    Hi, Can you send details about the host node? Kernel version, partitioning, OS release? What is the automatic update you mentioned, is this system updates? Also, what is the SolusVM version, 1.19 or 1.20?

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.